Post by: Space Between on September 06, 2002, 02:18:09 AM
Anybody having trouble with their key? :-)
Post by: rdc on September 07, 2002, 06:32:45 AM
I did try the cdrom afterwards ,as far as it was bootable and it setup untill the first setup screen .I do not know if it installs , and the question of working with the original key and all the rest (activation and so) .
The only thing I probably will need it for is for eventually running sfc /scannow
Post by: megatron on September 07, 2002, 07:25:46 AM
I dont need to reinstall but I want to know that I could!
Post by: Anonymous on September 07, 2002, 02:29:48 PM
I tried slipstreaming to my XP Pro Corp (legit) and my XP Pro (regular version).
Post by: rdc on September 07, 2002, 05:14:01 PM
I do not mind because I will never need it to setup , as I never needed the ones I made with w2k sp2 neither.
Post by: Anonymous on September 07, 2002, 11:16:30 PM
Post by: Space Between on September 08, 2002, 10:02:27 PM
As far as it not asking you to press any key too boot is a different story. Im taking it you used the sector 20 from the win 2kpro for your xp pro aswell. If you use the xp pro sector20.bin it won\'t ask you to press any key at all...atleast mine don\'t it just goes straight to setup up like the diskem1x.bin.
Has anybody tried changing the product key on a that certain corp. pro release to install and it working out??? Ive read where you can update/change the license key with a keygen and using the update license scheme...but will that work on install ???
If it don\'t work on a plain install then you\'d have to install regular winxp...then slipstream in xp. Again i have not got a chance to get it yet. I had a chance yesterday but it just wouldnt come fast enough (17k ;-/)
Post by: pierce14u2 on September 11, 2002, 03:11:48 PM
But i have succesfully used WINISO ver5.3 to make a ISO\'s of the original OEM disk and a Corporate CD, removed all the files from the original and imported the slipstream files and $oem$ directory (for the fully automated install) to the root of the cd and created my install disks from the ISO\'s i was able to save from WinISO.
Saves alot of time since I have to install the O/S on 5 computers a week. Makes for a fast recovery also.
Thanks to the tech guide for leading the way for US.
If anyone has any fixes or reasons why CDRwin is crashing at the end of the creation process on the XP cd creation, using the boot.bin I extracted from XP and the one that is on thetechgiudes web site for W2k. I would appritate it greatly.
Thanks
Erk King
MCSE
Post by: Tracky110XP on September 12, 2002, 04:40:07 PM
getting multiple errors like can\'t find the SP1.cab even though my txtsetup.ini is setup properly.
i then noticed that it now says that my pro install is home????
well i\'m still working on it and will update if needed.
Post by: WakeUpCall on September 15, 2002, 09:42:48 PM
tried it, works perfectly also generated office xp pro key and activated the product over the internet, works fine, well unless m$ knocks on my door sometime, which I believe is unlikely to happen because the keygen generates keys which they cannot distinguish from their own.
Post by: Space Between on September 17, 2002, 09:50:10 PM
you don\'t need to change the key anyhow
Post by: Space Between on September 17, 2002, 09:51:44 PM
also it sounds like you are using the same .dat file to boot off of for both installs
Post by: Anonymous on September 20, 2002, 02:12:55 AM
Post by: Anonymous on September 20, 2002, 02:28:50 PM
Post by: Megatron on September 22, 2002, 12:18:34 AM
I think this is not an isolated incident and if you tried it you get the same.
Post by: Anonymous on September 24, 2002, 09:52:52 PM
wouldn\'t microsoft wonder about a \"volume\" license key that it never issued being used for activation?
Post by: Rincewind on September 25, 2002, 12:01:20 AM
Post by: sabia on September 26, 2002, 07:31:57 AM
Anyone have any ideas where I went wrong?
Post by: Anonymous on September 30, 2002, 01:24:15 PM
happened to me with w2k
Post by: Anonymous on October 02, 2002, 02:12:29 PM
Hats off to the procedure.....................
Post by: jeff66 on October 04, 2002, 02:12:21 AM
I have at last succeeded using a slightly modified version of the windows 2000 procedure. My procedure is describe below
This procedure used the CDRWIN 3.9B program (www.goldenhawk.com) to extract the xpboot.bin from the boot sector and create a bootable Windows XP SP1 CD.
Slipstreaming Procedure:
A step-by-step procedure for slipstreaming Windows XP and Service Pack 1 can be found at the following web site:
http://www.windows-help.net/WindowsXP/winxp-sp1-bootcd.html (http://\"http://www.windows-help.net/WindowsXP/winxp-sp1-bootcd.html\")
NOTE: this site also has a detailed procedure for making a bootable-slipstreamed Windows XP SPI CD using Nero 5.5.9.9.
Extracting the xpboot.bin from Windows XP CD:
Before a bootable Windows XP CD can be created, the xpboot.bin must be extracted from the boot sector of the Windows XP CD. The procedure for extracting the equivalent file from Windows 2000 has been described on thetechguide:
http://www.thetechguide.com/win2kbootcd/bootsector.html (http://\"http://www.thetechguide.com/win2kbootcd/bootsector.html\")
The procedure for extracting xpboot.bin is exactly the same as for Windows 2000 except that the image file name is called xpboot.bin.
Creating a Bootable Slipstreamed Win XP SP1 CD:
Step-by-step procedure for making a Windows XP SP1 CD is based on the same procedure for making a Windows 2000 bootable CD:
http://www.thetechguide.com/win2kbootcd/ (http://\"http://www.thetechguide.com/win2kbootcd/\")
I made the following changes the Windows 2000 procedure for Windows XP:
1. Under the Backup/Tool Operation, I selected Build and record an ISO9660 image file.
2. I named the folder containing the slipstreamed Windows XP SP1 WXPOEM_EN that was then copied into the File Backup List as described for Windows 2000.
3. Under Image File Name, I named my ISO9660 image WXPOEM_EN.
4. Under ISO 9660 Advanced Options and the Volume Descriptor tab, I used WXPOEM_EN for the Volume Label.
5. Under ISO 9660 Advanced Options and the Bootable Disc tab, the only change from the Windows 2000 procedure was that I used xpboot.bin for the Image File Name.
6. At the main screen click the START button to begin the procedure. First the WXPOEM_EN ISO 9660 image file is created and this is then automatically burned on a CD. The CD produced by this procedure successfully booted from the CD ROM drive when I rebooted my computer.
Post by: toadlife on October 04, 2002, 01:03:59 PM
The intructions for making a bootable slipstreamed WinXP CD are the same as the instructions for making a bootable slipstreamed Win2k CD, except for the part about extracting the boot sector.
In my XP cd, I found that the boot sector was at LBA 293 instead of 20.
When trying to make a bootbale XP cd, If you follow the instructions for making bootbale a win2k disc and extract sector 20, your XP cd will not boot, because sector 20 on the XP cd does not contain the boot sector.
I was able to create a bootable cd without using WinISO. THe only things I used were:
My Original Windows XP CD
ISO Buster (to locate the addres of the XP Boot sector)
The demo version of CDRwin 3.9b
Nero (to burn the ISO image created with CDRwin)
Note: you can also extract the XP boot sector with IsoBuster, since it allows the extraction of specific sectors.
Post by: toadlife on October 04, 2002, 01:06:52 PM
Post by: LivelyYoungMan on October 05, 2002, 07:09:21 AM
Bug fixes are numerous and the system. All one needs is a different key. The FCKGW.............. does not work any more.
GREAT and ENJOY
Post by: Anonymous on October 07, 2002, 04:57:33 PM
Post by: Anonymous on October 10, 2002, 09:39:55 AM
Post by: Anonymous on October 11, 2002, 04:00:09 AM
Post by: MuffinAss on October 12, 2002, 08:31:46 PM
Post by: Anonymous on October 14, 2002, 05:48:16 AM
1.) Follow the slipstreaming process that is described here on the site...it works flawlessly.
2.) Use WinISO to read your real XP CD and save it to an ISO
3.) Remove ALL of the files and folders out of your newly created ISO (this will NOT remove the boot partition so this is what we want!!!)
4.) Add the files and then add each directory that you slipstreamed. Now you have the boot sector plus the entire XP cd with SP1.
5.) Save the ISO and burn with any program that can read ISO files (Nero is what I used)
VIOLA!
Post by: Spacesurfer on October 15, 2002, 07:04:41 PM
Following the easy directions provided by the following site. It shows you how to slipstream, then make burn it so that it boots:
http://www.tacktech.com/display.cfm?id=160...ect=article.cfm (http://\"http://www.tacktech.com/display.cfm?id=160&object=article.cfm\")
Post by: Lucky 1 on October 17, 2002, 07:54:18 AM
Look in the deployment guide for intergrated installation and do the neccesary procedesures. Then make it bootable and away you go baby! it works!
Post by: Anonymous on October 18, 2002, 10:32:05 PM
Post by: Anonymous on October 19, 2002, 04:07:37 AM
I cant seem to figure out how to have my cd use this file tho.
also, does an install running a fully automated answer file give you the opportunety to fit f6 and load RAID drivers? I use a promise controller in one of my systems and I need to load the fastrack 100 drivers, or the install fails.
This also prevents me from using a normal dos image as my boot sector as I can\'t install NT under dos on that system, it fails copying files in DOS. If it worked I cold run a batch file and have it call the unattented.txt file.
Any help would be appreciated
Mervin
[email protected]
Post by: Balder on October 19, 2002, 09:56:42 AM
I have made usual changes to the setupldr.bin (4 places) and txtsetup.sif (setupsourcepath = \"ENGLISHXPPRO\"), but when the setup restarts the first time, it prompts me for windows xp sp1 cd in path \"i386\".
How do I get past this problem? Plz help me...
/smile.gif\' class=\'bbc_emoticon\' alt=\':)\' />Thanks!
Post by: Anonymous on October 24, 2002, 04:13:55 AM
Post by: Anonymous on October 28, 2002, 02:23:13 AM
Post by: Anonymous on October 28, 2002, 06:21:58 PM
Anonymous
Post by: megatron on November 16, 2002, 07:20:02 PM
Post by: Anonymous on November 19, 2002, 04:26:05 PM
Have any of you tried windows update after the slipstreamed XP install??
Regards,
Frank
Post by: Space Between on November 20, 2002, 01:52:09 AM
Post by: Anonymous on November 26, 2002, 10:31:58 AM
Post by: aspenjimm on November 30, 2002, 08:26:41 PM
Thanks for all the answers.
you can pm me.... [email protected]
Post by: Anonymous on January 13, 2003, 05:40:27 PM
Post by: Anonymous on January 16, 2003, 01:06:45 AM
Post by: Lord_Lethris on February 05, 2003, 04:12:33 PM
Descuss/Explain?
Post by: Anonymous on February 10, 2003, 03:00:10 PM
Where do I find these files?
Post by: Anonymous on March 06, 2003, 01:45:55 PM
Post by: Anonymous on April 04, 2003, 05:39:33 AM
Talkback: How Did We Handle the XP Security Hole?
Did we do the right thing or unwittingly put more users at risk?
By Dave Roos
Yesterday, Leo and Pat found themselves in a difficult editorial dilemma. Leo had received a confidential email from Steve Gibson of Gibson Research alerting him to a potentially disastrous vulnerability in Windows XP. Gibson said the hole could be plugged by downloading Microsoft\'s latest service pack, but that the specifics of the vulnerability must be kept secret to avoid misuse by hackers.
As hosts of a TV show about computers, this put Leo, Pat, and the whole \"Screen Savers\" staff in a sticky situation. How should we best alert our viewers to the very real and immediate danger of the XP hole without giving hackers the information they need to exploit it?
Leo and Pat want your feedback. If you watched the show yesterday, how do you think we handled the situation? Did we give away too much? Did we rightly communicate the severity of the hole? Vote in the poll below and share your thoughts on our message boards (Talkback has filled up!).
Here\'s the story
Security experts like Steve Gibson get these kinds of tips all the time. It\'s their job to decide which information should remain on the inside and which is safe enough to release to the public. But this is relatively new territory for \"The Screen Savers.\" We had to start from scratch.
Gibson says that Microsoft has known about the XP security hole for 11 weeks. If we found out about it yesterday, then other organizations must have known about it as well. Oddly though, as of show time yesterday, there were still no stories written about the XP hole. Since reporters aren\'t likely to sit on a big story, there must have been a good reason.
In this case, the reason is that the XP security hole is incredibly easy to exploit. So easy, that if given the right information, anybody with Internet access could potentially clean out the hard drives of thousands of unassuming users. Who wants to be the dope to set off the worst hacker disaster in years?
Our decision
After considerable deliberation, we settled on a two-prong approach.
1. We would repeatedly impress upon our XP users the importance of downloading and installing the Microsoft service pack.
2. Since the service pack is a huge download (140MB for the full version, 30MB for the express install) and some people might have problems verifying their XP licenses, we decided to include information about a backdoor fix.
Here\'s the fix.
1. If you use XP, perform a search for a file on your C drive called \"uplddrvinfo.htm\" (without quotes).
2. Once you\'ve found the file, delete it or rename it. Doing so will not hinder your ability to use Windows XP.
We understood, however, that by supplying this fix, we may give outside parties just the information they need to exploit the vulnerability. This is why we once again recommend that you download the Microsoft service pack immediately or perform the simple fix above.
Sound off
We want to know what you think so we can determine how to best handle such situations in the future. Vote in the poll and share your opinions on our message boards (Talkback is full!).
Introduction
By now many of you would have discovered that Microsoft’s first Service Pack for Windows XP is among us, whether Microsoft like it or not. Recently a press release was issued by the software giant saying the Service Pack would be released on the 9th of September to end-users but as it happens, it was leaked before this date by beta testers and folks in the know – what a surprise.
As far as I have seen there is no official word available to us on what the Service Pack actually improves. Although judging from the past we can safely assume it will improve performance and stability, as well as included the latest security updates and new features such as Windows Media Player 9 which is included in Service Pack 1. On the other hand it will most likely also bring with it a whole bread of new problems…
During our testing we didn’t notice too many drastic physical changes to the OS after installing the Service Pack, but I’m sure there would be many changes “under the hood”, so to speak – For one we noticed in Office applications that things were quicker, well more responsive at least. For those wanting to update to Service Pack 1, there has been a lot of talk on several other websites regarding Microsoft attempting to stop users of pirated copies of Windows XP from updating, which is partly the reason for the publication of this guide.
Nobody likes piracy and we certainly don’t usually condone it but these days it’s unavoidable, wherever you turn or look. For the enthusiast crowd anyway, it’s almost mainstream – the term “crack” is becoming a well-known term even amongst the not so tech-savvy users in the computing world. Friends of mine who have been using computers for no more than 6 months already have half their programs on their computers cracked and are fully aware of the consequences.
Since Windows XP Service Pack 1 leaked its way onto the Internet people have been asking me regularly how to update when they are promoted during installation that they are running an illegal copy of Windows. This guide will explain how to get around this obstacle – Let’s face it, these users are already running an illegal copy of Windows - can further harm really be done?
Depending on how you look at it, there is two answers to this question – Let’s continue on anyway, even with the possibility of Microsoft pulling a knife to my throat.
Let’s Get Started
The process of updating to Windows XP Service Pack 1 is not as difficult as you might imagine. In fact, it is fairly simple actually.
Step 1 - First of all you will need to download the 133mb Service Pack 1 file from the Internet ready for installation, if you can find a working mirror anywhere. I would have recommended you getting it from Microsoft servers but from the time it took to write this guide Microsoft pulled it from their Premier Download section. So, here are a list of mirrors I have found that work at time of writing this guide – Keep trying, one of them will work eventually.
- Mirror #1 http://premierdownload.microsoft.com/downl...psp1_en_x86.exe (http://\"http://premierdownload.microsoft.com/download/whistler/SP/SP1/WXP/en-us/xpsp1_en_x86.exe\")
- Mirror #2
http://files.tweakers.net/xpsp1_en_x86.exe (http://\"http://files.tweakers.net/xpsp1_en_x86.exe\")
- Mirror #3
http://download.microsoft.com/download/whi...psp1_en_x86.exe (http://\"http://download.microsoft.com/download/whistler/SP/SP1/WXP/en-us/xpsp1_en_x86.exe\")
- Mirror #4
http://www.bagpipes.net/files/xp-utilities/xpsp1_en_x86.exe (http://\"http://www.bagpipes.net/files/xp-utilities/xpsp1_en_x86.exe\")
As we find more mirrors we will add them here, if you know any others please do us a favor and email us with the details!
If you have no luck finding the file, alternatively you can wait a few days till Microsoft officially release the Service Pack to the public.
Step 2 – Once you have downloaded the file you will need to also go ahead and download the sneaky Windows XP serial key changer – This is the program which makes the installation of Windows XP Service Pack 1 possible for you naughty folks out there that use an illegal copy of Windows. If you don’t change your serial key you’ll get booted out of the install process half way through with the following error message.
Of course, if you are one of those good folks who have a legit version of Windows, you can skip this section and jump straight to the installation of the Service Pack. The program we will use to change your serial key is readily available all over the Internet - For simplicity purposes we mirrored the file on our servers for download – The author of this program and TweakTown have no connection. Download the Serial Key Changer program and Viewer here. http://www2.tweaktown.com/files/xpsp1.zip (http://\"http://www2.tweaktown.com/files/xpsp1.zip\")
Let’s Get Started - Continued
Step 3 - Now that you have downloaded the Serial Key Changer and Viewer from our servers we are ready to go ahead and change your serial key. If you are using a pirated version of Windows XP Corporate Edition chances are you are using the same serial key which the majority of other people use, and it won’t work when go you to install the update. The Serial Key Changer program will give you a list of serial keys which will work when updating. Open the Serial Key Changer by running “XPProCorp-keyChanger.exe”; it will bring up a new window with a DOS based program as pictured below.
After the serial keys have been generated you will be prompted with the following screen which let’s you activate Windows.
From here you need to select, “Yes, I want to telephone a customer service representative to activate Windows” – Don’t worry, we don’t actually do it. After choosing this option you will then be taken to the following screen.
It doesn’t actually matter what country you choose from the Step 1 field, as we won’t be calling anyone. Ignore the rest and skip down to the bottom and click the Change Product Key button which will bring you to the following screen.
XP SP1 Updating - Page 4 [Let’s Get Started Continued Again]
Let’s Get Started – Continued Again
Now refer back to the Serial Key Changer program and simply choose one and type it into the New key field area as shown in the picture above. Once you’ve done that click the Update button. It will then proceed to update your serial key and bring you back to the Activate Windows by Phone screen. From here you can close this screen; your Windows serial key has been changed.
To confirm that your serial key has changed correctly to the one you choose from the Serial Key Changer Program you need to go ahead and open the Serial Key Viewer program by opening the file “WindowsXP Product Key Viewer.exe” which looks a little something like this.
Step 4 - Now that we have changed your serial key we are ready to go ahead and begin the install process of Windows XP Service Pack 1. Locate the update file and open it, you will be promoted with the “Welcome to the Windows XP Service Pack 1 Setup Wizard”, click Next to continue. Next up you will need to agree to the license agreement which is followed by the option to either Archive Files or Do Not Archive Files. It is recommended that you do choose the Archive Files option in case you happen to run into problems after installation.
Now you should have the installation process happening, depending on the speed of your system the update should install in rough 10 – 20 minutes (maybe longer), especially if you choose the Archive Files option which makes the process quite a bit longer.
After the installation process is finally finished you will be promoted to reboot your PC – go ahead and restart your system. Once you are back into Windows you will have Service Pack 1 installed. To confirm that it did actually install okay, go to your desktop, highlight My Computer and press ALT + Enter together and you should see a screen similar to the one below like on my system.
XP SP1 Updating - Page 5 [Conclusion]
Conclusion
OK folks, so we didn’t exactly do it the legit way but as we said in the introduction, if you were already running an illegal copy of Windows what further harm could really be done. By now you should be basking in the glory of the latest Service Pack for Windows XP, at least all the latest bug fixes and security updates.
If anyone has any comments or questions regarding this guide please direct them to the Windows XP section of our forums. I will not be answering question through email unless you are Bill Gates or someone of similar importance firing me with abuse.
Until next time, take care!