Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - integragreg

Pages: [1]
1
Software / Bootable W2K PRO slipstream no F6 key
« on: May 19, 2004, 09:52:21 AM »
Sorry if I sound judgemental, and if I made a mistake, I apologize...I've had some of my own posts ripped off and claimed by others in the past, so I'm a bit touchy about that.

The original post that I am referring to is here

It was dated June of last year, and your first one is dated May of this year.  The text is almost verbatim...

Greg

2
Software / Bootable W2K PRO slipstream no F6 key
« on: May 17, 2004, 02:30:53 PM »
Well, well, well...as I was rummaging around on usenet for solutions to my problem, what did I find?

A POST TO A DIFFERENT GROUP DATED ALMOST A YEAR AGO BY A TOTALLY DIFFERENT PERSON THAT IS MARK'S ORIGINAL POST VERBATIM!

COPYING A POST FROM ANOTHER SITE AND PUTTING YOUR NAME ON IT IS PLAGIARIZING AND UNETHICAL, MARK.

NEVERMIND,   I DON'T WANT YOUR HELP AFTER ALL.  http://images.thetechguide.com/forum/public/style_emoticons/<#EMO_DIR#>/mad.gif\' class=\'bbc_emoticon\' alt=\':angry:\' />

Greg Lusk

3
Software / Bootable W2K PRO slipstream no F6 key
« on: May 17, 2004, 12:07:56 PM »
Mark,

Thanks for your post.  Your installation is very similar to mine, and I would have spent a considerable amount of time trying to figure this stuff out.

I apologize in advance for the length of this post.  However, I am still having difficulty getting my unattended installation working, and was hoping you might have some suggestions.  

I followed your recommendations and set up my txtsetup.sif, txtsetup.oem, and winnt.sif as shown in your post.  Text mode seems to proceed normally, but at the end, it cannot find any hard drives installed.  I have verified that the installation works in manual mode (i.e., F6, insert floppy and select appropriate scsi driver).  So it appears that the automated install simply isn't finding the correct drivers.

My setup CD has the following directory structure:

Code: [Select]
root
|---$oem$
     |---$1
     |      |---drivers
     |           |---raid
     |                |---promise
     |                     |---Fasttrak.cat
     |                          Fasttrak.inf
     |                          Fasttrak.sys
     |                          txtsetup.oem
     |                          txtsetup.sif
     |
     |---$$
     |---C
     |---D
     |---Textmode
     |    |---Fasttrak.cat
     |         Fasttrak.inf
     |         Fasttrak.sys
     |         txtsetup.oem
     |         txtsetup.sif
     |---i386
          |---txtsetup.sif
          |---fasttrak.sys
          |---winnt.sif
          |---[other standard files and subdirectories]

==================================

My winnt.sif file is as follows:

;SetupMgrTag
[Data]
    AutoPartition="0"
    MsDosInitiated="0"
    UnattendedInstall="Yes"
   
[Unattended]
    UnattendMode=FullUnattend
    OemSkipEula=Yes
    OemPreinstall=Yes
    TargetPath=\WINNT
    DriverSigningPolicy=Ignore
    NonDriverSigningPolicy=Ignore
    OemPnPDriversPath=\drivers\net\INTEL;\drivers\raid\promise
       
   
[GuiUnattended]
    AdminPassword=*    
    AutoLogon=Yes
    AutoLogonCount=2
    OEMSkipRegional=1
    TimeZone=35
    OemSkipWelcome=1

[UserData]
    FullName="MyName"
    OrgName="MyCompany"
    ComputerName="NEWCOMPUTER"

[LicenseFilePrintData]
    AutoMode=PerServer
    AutoUsers=5
   
[GuiRunOnce]
    Command0="c:\drivers\net\INTEL\Proset.msi /qn"
   
[Components]
    accessopt = off
    ;paint = off
    cdplayer = off
    charmap=off
    cluster = off
    freecell = off
    fp_extensions = off
    indexsrv_system = off
    minesweeper = off
    ;media_clips = off
    ;media_utopia = off
    pinball = off
    solitaire = off
    chat = off
    dialer = off
    rec = off
   
[Identification]
    JoinWorkgroup=WORKGROUP

[Networking]
    InstallDefaultComponents=Yes

[NetAdapters]
    Adapter1=params.Adapter1
    Adapter2=params.Adapter2

[params.Adapter1]
    INFID="Intel E1000 [1]"

[params.Adapter2]
    INFID="Intel E1000 [2]"

[NetClients]
    MS_MSClient=params.MS_MSClient

[NetServices]
    MS_SERVER=params.MS_SERVER

[NetProtocols]
    MS_TCPIP=params.MS_TCPIP

[params.MS_TCPIP]
    DNS=No
    UseDomainNameDevolution=No
    EnableLMHosts=Yes
    AdapterSections=params.MS_TCPIP.Adapter1,params.MS_TCPIP.Adapter2

[params.MS_TCPIP.Adapter1]
    SpecificTo=Adapter1
    DHCP=No
    IPAddress=192.168.10.197
    SubnetMask=255.255.255.0
    DefaultGateway=192.168.10.2
    DNSServerSearchOrder=192.168.10.16
    WINS=No
    NetBIOSOptions=1
    DNSDomain=mydomain.local
[params.MS_TCPIP.Adapter2]
    SpecificTo=Adapter2
    DHCP=No
    IPAddress=172.17.8.10
    SubnetMask=255.255.255.0
    DNSServerSearchOrder=172.17.8.1
    WINS=No
    NetBIOSOptions=1
    DNSDomain=mydomain.local

[Branding]
BrandIEUsingUnattended=Yes

[MassStorageDrivers]
    "Win2000 Promise FastTrak TX2000 (tm) Controller"="txtsetup.sif"

[OEMBootFiles]
txtsetup.sif
txtsetup.oem
Fasttrak.cat
Fasttrak.inf
Fasttrak.sys


========================

My txtsetup.oem file is as follows:

========================
;SetupMgrTag
[Disks]
d1 = "Promise FastTrak Family Driver Diskette", \fasttrak, \
d2 = "Promise FastTrak Family Driver Diskette", \fasttrak, \nt4
d3 = "Promise FastTrak Family Driver", \txtsetup.sif,""
d4 = "Promise FastTrak Family Driver Diskette", \fasttrak, \WinXP
d5 = "Promise FastTrak Family Driver Diskette", \fasttrak, \WNET

[Defaults]
scsi = FastTrak_TX2000_nt5

[scsi]
FastTrak_TX2000_net = "Win.NET Promise FastTrak TX2000 (tm) Controller", FastTrak
FastTrak_TX2_net = "Win.NET Promise FastTrak100 (tm) TX2000 Lite Controller", FastTrak
Fasttrak100_net = "Win.NET Promise FastTrak100 (tm) Controller", FastTrak
FastTrak_TX2000_xp = "WinXP Promise FastTrak TX2000 (tm) Controller", FastTrak
FastTrak_TX2_xp = "WinXP Promise FastTrak100 (tm) TX2000 Lite Controller", FastTrak
Fasttrak100_xp = "WinXP Promise FastTrak100 (tm) Controller", FastTrak
FastTrak_TX2000_nt5 = "Win2000 Promise FastTrak TX2000 (tm) Controller", FastTrak
FastTrak_TX2_nt5 = "Win2000 Promise FastTrak100 (tm) TX2000 Lite Controller", FastTrak
Fasttrak100_nt5 = "Win2000 Promise FastTrak100 (tm) Controller", FastTrak
FastTrak_TX2000_nt4 = "WinNT Promise FastTrak TX2000 (tm) Controller", FastTrak
FastTrak_TX2_nt4 = "WinNT Promise FastTrak100 (tm) TX2000 Lite Controller", FastTrak
Fasttrak100_nt4 = "WinNT Promise FastTrak100 (tm) Controller", FastTrak

[Files.scsi.FastTrak_TX2000_net]
driver = d5, Fasttrak.sys, Fasttrak
inf    = d5, Fasttrak.inf
catalog= d5, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2000_net]
id="PCI\VEN_105A&DEV_6269", "Fasttrak"

[Files.scsi.FastTrak_TX2000_xp]
driver = d4, Fasttrak.sys, Fasttrak
inf    = d4, Fasttrak.inf
catalog= d4, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2000_xp]
id="PCI\VEN_105A&DEV_6269", "Fasttrak"

[Files.scsi.FastTrak_TX2000_nt5]
driver = d3, Fasttrak.sys, Fasttrak
inf    = d3, Fasttrak.inf
catalog= d3, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2000_nt5]
id="PCI\VEN_105A&DEV_6269", "Fasttrak"

[Files.scsi.FastTrak_TX2000_nt4]
driver = d2, Fasttrak.sys, Fasttrak
inf    = d2, Fasttrak.inf

[Files.scsi.FastTrak_TX2_net]
driver = d5, Fasttrak.sys, Fasttrak
inf    = d5, Fasttrak.inf
catalog= d5, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2_net]
id="PCI\VEN_105A&DEV_7275", "Fasttrak"

[Files.scsi.FastTrak_TX2_xp]
driver = d4, Fasttrak.sys, Fasttrak
inf    = d4, Fasttrak.inf
catalog= d4, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2_xp]
id="PCI\VEN_105A&DEV_7275", "Fasttrak"

[Files.scsi.FastTrak_TX2_nt5]
driver = d3, Fasttrak.sys, Fasttrak
inf    = d3, Fasttrak.inf
catalog= d3, Fasttrak.cat

[HardwareIds.scsi.FastTrak_TX2_nt5]
id="PCI\VEN_105A&DEV_7275", "Fasttrak"

[Files.scsi.FastTrak_TX2_nt4]
driver = d2, Fasttrak.sys, Fasttrak
inf    = d2, Fasttrak.inf

[Files.scsi.Fasttrak100_net]
driver = d5, Fasttrak.sys, Fasttrak
inf    = d5, Fasttrak.inf
catalog= d5, Fasttrak.cat

[HardwareIds.scsi.Fasttrak100_net]
id="PCI\VEN_105A&DEV_4D30", "Fasttrak"

[Files.scsi.Fasttrak100_xp]
driver = d4, Fasttrak.sys, Fasttrak
inf    = d4, Fasttrak.inf
catalog= d4, Fasttrak.cat

[HardwareIds.scsi.Fasttrak100_xp]
id="PCI\VEN_105A&DEV_4D30", "Fasttrak"

[Files.scsi.Fasttrak100_nt5]
driver = d3, Fasttrak.sys, Fasttrak
inf    = d3, Fasttrak.inf
catalog= d3, Fasttrak.cat

[HardwareIds.scsi.Fasttrak100_nt5]
id="PCI\VEN_105A&DEV_4D30", "Fasttrak"

[Files.scsi.Fasttrak100_nt4]
driver = d2, Fasttrak.sys, Fasttrak
inf    = d2, Fasttrak.inf

[Config.Fasttrak]
value = "", Tag, REG_DWORD, 1

=========================

Any advice would be greatly appreciated.

Thanks,

Greg Lusk

Pages: [1]