video card, boot problems

[Carl]

Got a little problem with my video card(GeForce2 MX 32).When i boot my computer i see the windows logo screen and when it supposed to disapear my computer always reboot. So i\'ve installed an old matrox g100 and everything work fine. Is there something to do with my card or i can just throw it in the garbage??thx

[rdc]

Have you tried uninstalling your old video card first and set the video to vga 256 collors .Then turn off your computer , replace the old by the new card and restart windows again .
Install video drivers and follow instructions

[rdc]

Ensure that you have the following settings in your system
               BIOS setup:
                   Enable \"Assign IRQ to VGA\"
If possible set video to  VGA 16 collor mode
instead of 256 collor mode
Read also the following :
The  following motherboards were found to have  problems
          working  with  the  GeForce card.   Please  contact  the
          motherboard manufacturer for an update.

          Asus  P2L97-DS  v1.03  (might need motherboard  hardware
          patch), Gigabyte GA-6BXC rev 1.7, FIC CL31-A, Elite P6LX-
          A and Elite P6LX-A+.

    viii) FIC motherboard compatibility
          There is a known issue with FIC PA2013 motherboard, only
          revision  2.1 and above will work with the new  graphics
          cards.

     ix)  Gigabyte motherboard compatibility.
          If you are using the following motherboards manufactured
          by  Gigabyte, you might need to set the jumpers to work.
          Please consult with the manufacturer manual.
            GA- BX2000
            GA -6BXE
            GA -6BA
            GA -6BXC
Those notes came with my geforce 2 GTS from creative labs ,perhaps they apply to your card too ,but you must read the readme.txt first