« previous next »
Pages: 1 [2]

Author Topic: WIN2K SP3  (Read 15173 times)

Anonymous

  • Guest
WIN2K SP3
« Reply #20 on: August 20, 2002, 06:49:48 PM »
hey i did slipstream the sp3 succesfully with the instructions on how to do the sp2 and i also modified the setup.ini so it does not require the oem product key
Logged

Anonymous

  • Guest
WIN2K SP3
« Reply #21 on: August 21, 2002, 08:24:50 PM »
I used Roxio Easy CD creator 5 to burn my bootable Slipstreamed Sp3 win2k server without problem.
But when I tried to add $OEM$  folder into the CD,  the folder name is not accepted by the file system.

Is it CDRWIN can fix this problem?
Can SLAM tell a little bit more about the process of integrating IE6 & post IE6 patches?

Cheers!
Logged

Anonymous

  • Guest
WIN2K SP3
« Reply #22 on: August 25, 2002, 09:27:35 PM »
i few question first can i make a unattend script so i will set up my network for me

you know make a lan connection with xxxxx settings.  And then have it set up my dial up connection with xxxx settings

adn at the end of the PID number in my setup.ini it says oem  not 000   hwo can i fix this so i caint got to put it in  wioht out makign a unattend script.
Logged

Offline Twinkie

  • member
  • Full Member
  • ***
  • Posts: 168
  • Karma: +0/-0
    • View Profile
WIN2K SP3
« Reply #23 on: August 26, 2002, 05:56:54 PM »
Yes you can setup connection settings to a point anyway.  Check the unattend.doc file that M$ sends out.  It should have a section giving you all the options available.  Long document.

If the PID ends with OEM change it instead of 000.
ie... 000=270 will now be OEM=270
Logged
Hope this Helps,

Twinkie

Gilbert

  • Guest
WIN2K SP3
« Reply #24 on: October 24, 2002, 04:53:37 PM »
Would you email me how you did it, kind of a step by step. I have inherited a ris server with sp2 based images, how do I update the images to sp3. It would be a life saver, please email me at blackxpboxEmail Removed.
Logged

Anonymous

  • Guest
WIN2K SP3
« Reply #25 on: October 24, 2002, 04:57:01 PM »
Have you recieved the info? If so please email it to blackxpboxEmail Removed. I am in your same situation. Thanks...
Logged

Austi

  • Guest
WIN2K SP3
« Reply #26 on: October 29, 2002, 08:23:43 AM »
Try this site http://www.nu2.nu/bootcd/ this guy knows what he\'s talkin\' about there\'s a very good doc on how to slipstream and remove produckt id
and if you want to make a winnt.sif then do it with the windows 2000 setupmanager the tool is on the w2k server cd
in the supporttoolsDeploy.cab  open this file and the open setupmgr.exe to make your winnt.sif file place it in the i386 folder and you done for a full automatic installation
P.S.If you have copied windows 2000 from MSDN CD you can disable the product key prompt:
Edit i386/setupp.ini file, remove the read-only attribute and open the file in notepad.

Change the last 3 digits of the Pid number to 270
Example:
[Pid]
ExtraData=123456789012345678901234567890
Pid=12345270
this trick works great
Logged

Imtiaz Khan

  • Guest
WIN2K SP3
« Reply #27 on: November 26, 2002, 11:35:37 AM »
Many thanks for giving valuable information for the
slipsteaming of SP3 with w2k. I thing it was not
possible to me if I did not find WINCDMAN 1.01 web page.

This tool works fine to me but the problem is when I
boot this cd w2k setup give me an error \"You are about
to install and evaluation version of Windows 2000
Porfessional which will expire after 120 days......\".

Kindly help me out or let me know if any process is
wrong or I am missing some thing. I have all
registered W2k Prof installation and SP3 downloaded
from Microsoft\'s web page.
Logged

Phobes

  • Guest
WIN2K SP3
« Reply #28 on: July 31, 2003, 01:38:47 PM »
If you ever need to know how to slipstream a Service Pack, I would suggest www.bink.nu

He's certified in several categories, and he uses Nero (a MUCH better burning software)
Logged

probir

  • Guest
WIN2K SP3
« Reply #29 on: August 09, 2003, 01:10:50 AM »
[quote name=\'Anonymous\' date=\'Aug 4 2002, 04:25 AM\']Hi!

I have managed to slipstream perfectly and install it but i now want to create a unattened insatllation does anyon know how to create and can you tell me where i can place this file on the CD and not the floppy to install off the CD also how can a install Windows Media Player 7.1, IE6 and DirectX 8.1 staraight after installtion W2K with not user interactions completly automated[/quote]
 please send me the technic for w2k slipstreaming direct x 9 and windows media player 7.1  to this address:::[email protected]
Logged

ThrowedOff

  • Guest
WIN2K SP3
« Reply #30 on: May 13, 2004, 09:28:25 PM »
----HERE'S A POSSIBLE SOLUTION IF YOU HAVE NFORCE MB----



I had the DRIVER_IRQL_NOT_LESS_OR_EQUAL problem with a reference to scsiport.sys... it mainly occurred when I tried to get into any of my drive properties, preventing me from using scandisk,etc.

Here is how I fixed it:

(First off, here are my system specs)
Windows XP
AMD Athlon 3200+
nVidia GeForce 5600
512mb DDR
WD HD
nForce2


I've been trying to fix it or months to no avail, checking every site google pulls up.
Finally, I went to nVidia's site and downloaded the newest drivers (Unified 2.4) for IDE, Audio, etc.

They can be found at this page: http://www.nvidia.com/object/nforce_udp_winxp_4.24

I also downloaded the nVidia system utility found at http://www.nvidia.com/object/sysutility_1.08.5.html
though I'm sure this has nothing to do with it.



I rebooted, and it worked great. Let me know if this works for you.... ehovindEmail Removed
Logged
Pages: 1 [2]
« previous next »