Author Topic: Recovery CD, etc.. (Read 6507 times)

Anonymous · « **on:** September 26, 2001, 10:12:52 PM »

How difficult is it to make a recovery CD. I, like most of you, clean boot my computer often because of all the trial softwares and/or beta softwares I install. As much fun as it is to clean out the computer, it becomes a hassle to reboot my computer with even the OS. I\'ve read about ghosting and have tried Norton Ghost but didn\'t have much luck. Is there any easier way, not that I\'m opposed to hard work. Any suggestions you can give me will be greatly appreciated. thanks.

wizard2010 · « **Reply #1 on:** September 30, 2001, 05:03:00 PM »

I cant understand the problems you might have had with Norton Ghost ?

I can bring 3GB back in 7mins....

Norton is the soulution,
if you require a bit more help with Norton Ghost just send me
a message....

But you must have 2 Physical HD\'s..

Couldnt live without Norton Ghost Now.

Just zeros & ones

rdc · « **Reply #2 on:** October 01, 2001, 01:58:31 AM »

I use Norton ghost too , exellent program .Very usefull .
I had only a small problem after changing my scsi host adaptor to asc29160 . I was getting write errors and I had to make a new cdrom with the bootup image from win me and the contents of the original cdrom of Norton Ghost and it functioned as before .

Anonymous · « **Reply #3 on:** October 05, 2001, 10:20:53 PM »

Try \'Powerquest Drive Image 5\'

it\'s da business :-)

6 Gig in 25 minutes cross 100Mbit LAN

Much simpler than Norton Ghost and less likely to throw horible nasty errors.

Anonymous · « **Reply #4 on:** October 11, 2001, 04:16:20 PM »

Drive Image does have a simpler user menu; but ive noticed Ghost seems to make smaller image files & work faster over a lan - also; if you happen to have the enterprise edition; an image server is easy to set up

Ghost & Image both will run w/only one HD - you do however need seperate partitions

SexyZane · « **Reply #5 on:** October 14, 2001, 06:21:47 AM »

Actually, I live of Ghost, it works very very good (you need Ghost 2002 for WinXP). You don\'t need 2 hd, 1 divided in two partition is enough.

I don\'t think you can find anything easier...

--
Articoli tecnici in italiano?
http://www.zanezane.net

rdc · « **Reply #6 on:** October 14, 2001, 07:27:34 AM »

I only work with the ghostpe program (on bootable cd) of ghost 2001 to make my drive (partition) image of my XP drive . I haven\'t installed the windows program Ghostexplorer part in XP, only in W2K .
I didn\'t even know this program doesn\'t function in XP . I never use it on W2K and I suppose to install my image of the winxp drive will function as well as the one of the w2k drive .For me that\'s the most important part of Norton Ghost .

To know others is wisdom !
To know yourself is enlightenment !

SexyZane · « **Reply #7 on:** October 16, 2001, 03:41:46 PM »

To use Ghost with XP you do need Ghost 2002: earlier versions don\'t work with XP NTFS (with XP FAT they work as well)

--
Articoli tecnici in italiano?
http://www.zanezane.net

rdc · « **Reply #8 on:** October 18, 2001, 01:57:33 AM »

tks , I still use Fat32 , a question of entering in dos without the use of other programs .

To know others is wisdom !
To know yourself is enlightenment !

Anonymous · « **Reply #9 on:** October 19, 2001, 01:52:17 AM »

I can get Ghost to work just fine with a floppy, my problem is I haven\'t been able to figure a way to make a bootable CD with Ghost and the image on it. I can actually get everything on the CD but after Ghost loads it can\'t find the image. I\'ve tried floppy imulation in Nero and a few other scenerios, does anyone have a clue how to do this and with which burning program? If anyone knows the answer to this, please be as specific as possible.

rdc · « **Reply #10 on:** October 19, 2001, 04:17:45 AM »

you just need to have a bootable cd with ghostpe on it .
The Ghostcd is normally a bootable cd . I just had to make the winme boot disk , the bootimage of my Ghost cd to repair errors in dos with my new asc 29160 and the old Norton Ghost cd bootimage.
The ghost image of a drive or partition doesn\'t have to be on a bootable cdrom , just one or more plain cdr , or on a second harddisk ,or partition .

To know others is wisdom !
To know yourself is enlightenment !

Anonymous · « **Reply #11 on:** October 19, 2001, 06:09:28 PM »

I did put Ghost PE on the CD but after Ghost loads It can\'t \"see\" the Ghost image on the CD. If I boot from floppy, then there is not a problem seeing it on the CD. What I want is a bootable Ghost CD with the Image on the same CD, where Ghost will \"see\" the image. Not sure if I\'m explaining myself correctly but I think I am. I think it has something to do with the burning process because I\'ve tried using floppy emulation with no luck in NERO. maybe the settings in NERO are wrong but I\'m not sure because I haven\'t had to make too many bootable CDs with any sort of emulation. Any help would be welcomed.

rdc · « **Reply #12 on:** October 20, 2001, 02:38:38 AM »

you must first start ghostpe(cd tools , ghostpe) on your cd and then via image to disk or disk to image, go to the image on your harddisk .
You better have a dos mouse program r somewhere on your harddisk

To know others is wisdom !
To know yourself is enlightenment !

rdc · « **Reply #13 on:** October 20, 2001, 04:56:09 AM »

If you want to make a bootable cd with nero with the *.gho on it and also ghostpe , the you have to make a bootable cd with a bootable floppy image (win 98 ,winme ),put the xxx.gho on it , and also ghostpe.exe and eventually a dos mouse.exe or mouse.com .You can eventually put an autoexec.bat on it to start the mouse program and then the ghostpe.exe .
But then your xxx.gho must realy be on the small size .

To know others is wisdom !
To know yourself is enlightenment !

Anonymous · « **Reply #14 on:** October 21, 2001, 04:25:09 PM »

I figured it out, finally. At first, I had my CD/RW connected through an ATA card, even though that wasn\'t really the problem, I just switched cd rom drive to the ATA card and the CD/RW drive to my secondary IDE channel and now Ghost just burns a bootable cd straight to the CDRW. Although this didn\'t solve my origional problem, I\'m getting the results that I wanted, just in a different way.Thanks for the help anyway.

msixteen · « **Reply #15 on:** October 27, 2001, 07:13:00 PM »

I have powerquest drive image pro 4.0. It works great!
I was wondering if you know how to make a bootable CD for this program? I went to the powerquest web site about this but, I\'m doing something wrong. Thanks in advance if you can help.

Anonymous · « **Reply #16 on:** October 29, 2001, 12:52:50 AM »

I had the same problem when trying to use Norton Ghost. Finally able to figure it out after about a week of testing. I\'ve never used Drive Image, so I can\'t help ya with that one. What I really hate about all of the backup programs is the fact that you cant back up without writing the image to a fat partition, if you prefer that instead of burning straight to a cdr within the backup program.
I totally abandoned fat last year and I\'m surprised that Symantec and powerquest haven\'t come up with a real alternative to this yet, considering that Microsoft has just about all but abandoned fat as well. You can still use fat on XP but anyone who has an ounce of smarts wouldn\'t do it.
Anyone out there who feels the same way about the FAT file system?

Anonymous · « **Reply #17 on:** October 31, 2001, 08:12:15 PM »

i was wondering if it was possible to boot up a windows 2000 pro or server system (NTFS partition) from a CD/floppy while having read and write capabilities on the drive (xcopy capabilities would also be nice if i can get away with it.).

thanx in advance

P.S. i have been looking into ERd commander but would like another solution.(say i have an emergency and i don\'t have my software cabinet nearby)

enderbeanEmail Removed

Anonymous · « **Reply #18 on:** November 04, 2001, 06:14:02 PM »

In respond to RDC,

Do you or anyone in here know how to make a bootable Windows 98 or ME CD? I have tried to follow various instructions from the web, including the one that came straight out from Stevens, the guy who invented the El Toritos Spec. and guess what, it is still not working. The reason, I surmised, is because the instructions are not in a great details, also the ultility that they used (Norton Disk Editor) is what I dont have. I, however, replaced it with WinHex and other similar ones but arrived at a very undesirable outcome. If you or anyone in here know the exact software and detail steps of making that bootable CD, please email that to me at ANDREWNEWMAN_2000Email Removed. Thank you very very much in advance.

The_Flames · « **Reply #19 on:** November 05, 2001, 06:48:40 AM »

I know from nero and easycd you can poing a boot floppy and it will bake the cd book off the floppy, if you know dos you ccan configure autoexec & config sys to boot the cdrom and do all the needed fancy stuff

News:

Author Topic: Recovery CD, etc.. (Read 6507 times)

Anonymous

Anonymous

Anonymous

SexyZane

SexyZane

Anonymous

Anonymous

Anonymous

msixteen

Anonymous

Anonymous

Anonymous